About Cement And Concrete Testing
We supply a vast range of bitumen-asphalt testing equipment that is widely used while constructing various infrastructures. These are precision made to yield accurate output. The range includes Benkelman beam, centrifuge extractors, core cutting & core drilling machines, standard penetrometer, stripping value and many more. Along with the standard orders, we can custom make equipment with the best use of our resources. Our cost competency & timeliness in order processing has made us a preferred supplier of industrial testing equipment.
Concreate Testing Equipments
Air Entertainment Meter
View Detail

The apparatus consists of a pressure tight flanged cylindrical measuring bowl of 0.005 cubic meter capacity for maximum size of aggregate 38mm. The bowl is fitted with a removable flanged conical cover assembly with the help of a seal.  

Blaine's Air Permeability Apparatus
View Detail

The apparatus consists one each of permeability cell 12.5mm I.D., Manometer 'U' type mounted on stand with a built in stop cock, Perforated disc, Plunger Rubber stopper, Rubber tube 30cm long. Packet of 12 filter paper discs and a bottle of 100cc dibutyiphthalate liquid.

VSA Camber Board
View Detail

Used to check and maintain the slope of the road as per design. Material Aluminum section of size 24 mm x 45 mm of thick gauge. Size 3 meters long

Capping Set
View Detail

For correct compressive strength of concrete cylinders, the end surfaces of the specimen must be truly flat. If they are not using capping compound and a capper, the faces are plastered flat. .

Compaction Factor Apparatus
View Detail

It consists of two rigid conical hoppers and a cylinder mounted on a rigid metal frame. The lower openings of the hoppers are fitted with hinged trap-doors having quick release catches.

Compression Testing Machine
View Detail

Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen.

Concrete Permeability Apparatus - Single Cell
View Detail

The concrete permeability apparatus comprises of a brass/ gunmetal cell of squares cross section mounted on a stand and a pressure chamber is connected to the cell through copper tubing and T-connector mounted on the stand with sleeve packed valve and rubber hose pipe with end connections.

Concrete Test Hammer
View Detail

Consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested.

Concrete Test Hammer- Digital 
View Detail

It is similar to the above with digital display of result.

Curing TankA
View Detail

Curing Tank for 6/12 moulds of 150mm / 70.6mm size Curing Tank for 12/24 moulds of 150mm / 70.6mm size

Flexure Testing Machine 
View Detail

It is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kg/sec.

FTM Hand Operated
View Detail

The machine consists of a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable.

FTM (Electrically Operated)
View Detail

Same as above but instead of a hand pumping unit, a separate electrically cum hand operated pumping unit housed in a cabinet is supplied.  A facility for hand operation is provided.

Gauging Trowel
View Detail

weight approximately 210gm. Best quality with hardwood handle blade length approx. 200mm.

Gillmore Needle Apparatus
View Detail

 A base with a vertical shaft and two horizontal arms. The lower arm is adjustable for height. 1 No. Initial Needle 1/12 inch dia 1/4 lb.wt. 1No. Final Needle 1/12 inch dia. 1lb.wt. 1No.

HJ (Hand Operated) Remote
View Detail

For applying loads for various tests in the field or laboratory. Hydraulic jack hand operated with separate pumping units. These jacks are portable and available in various capacities.  The approximate lift of the ram is 90 to 120mm. 

Jolting Apparatus
View Detail

The jolting apparatus consists of a rectangular table rigidly connected by two support arms to a spindle at a horizontal distance of 800mm from the Centre of the table.

Kelley Ball Penetration
View Detail

It consists of a cylinder with a ball-shaped bottom and handle, together weighing 15 kg. A strip frame, guides the handle and serves as a reference for measuring the depth of penetration.

Laboratory CemenAutoclave
View Detail

With stainless steel chamber (21 kg/cm.sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure.

Laboratory Concrete Mixer
View Detail

Concrete mixer laboratory type, electrically operated. Designed to remove the burden- some work of hand mixing. Uniform thoroughly mixed batches can be produced.

Laboratory Concrete Mixer
View Detail

This is a hand operated concrete mixer and is suitable to mix 1 cut to 1. 1/2 CFT material. It is mounted on two rubber tyred/stand.

Lateral Extensometer
View Detail

The unit consists of two movable frames pivoted at one end. The extensometer is fixed to the specimen with the help of tightening screws. The lateral extension is indicated on a dial gauge of 0.002mm x 12mm travel.

Survey Measuring Chainitem
View Detail

Used for finding specific gravity of hydraulic cement. Made from borosil glass. The flask is 243mm in total height, having a bulb of 90 mm dia of 250ml approximate capacity.

2014 Copyright Roorkee scientific Emporium & All Rights Reserved