Soil Testing Equipments
CBR Test Field
View Detail

Mechanical screw loading jack, 10,000 kg. capacity with U-bracket and swivel head. Penetration piston, 50 mm dia. threaded at the upper end.   . 

CBR(Hand Operated)
View Detail

the equipment consists one each of the following: Load Frame, Hand operated, Capacity 5000kg. with high and low rates of travel of the load screw. Mould made frame Gun-metal / Brass, 150mm internal dia x 175mm high, with perforated base plate and extension collar 50mm high. 

Standard Compaction Test
View Detail

Similar to above but supplied with bench mounting type 5000kgf. capacity load frame motorized, in place of load frame hand operated. The lead screw of the load frame has a single constant rate of travel of 1.25mm/min.

Heavy Compaction Test
View Detail

Instrument consists one each of : Compaction Mold, gun metal, 150 mm ID X 127. 3 mm height volume 2250cc. complete with collar and base plate.

Universal Automatic Compactor
View Detail

It is a motor driven mechanical compactor useful for soil compaction into 100 mm or 150 mm diameter moulds. 

Compression Proving Rings
View Detail

Proving rings are used for load measurements and are used in outfits of a number of Soil / Cement & Bitumen Testing Equipment's like Direct Shear Test Apparatus.

TAC Proving Ring
View Detail

Tension Compression Proving Rings are having standard 1/2" (BSF Threads) and for measuring tension , 2 nos. Tension rods having male threads at both ends are supplied.

Cone Penetrometer
View Detail

For determining the liquid limit of soils. This is specially useful to obtain reliable and accurate results for those soils which have low plasticity index.

Consolidation Apparatus
View Detail

Consolidation test is uni-dimensional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. 

Consolidation Apparatus
View Detail

Consist of 3 consolidation test assemblies mounted on a single frame. Complete with 3 sets ofconsolidometer cell assembly for 60 mm dia samples and three sets of weights each giving 10 kg/sq.cm. on each sample.

Core Cutter
View Detail

This is used for determination of in situ dry density of natural or compacted fine grained soil, free from aggregates. 

Dames And Moore Sampler
View Detail

Highly useful for sampling soils. The sample collects into rings inside the sampler. These rings along with the specimen can be directly placed in a consolidometer cell assembly.

Dial Gauge
View Detail

Used for taking measuring settlement of soil, used as flow meter in Marshall stability test to measure deformities, strains, displacements in general.

DSA(Hand Operated)
View Detail

The apparatus comprises of the following: Loading Unit: Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8 kg/sq.cm. Load is applied either directly or through a counter balanced detachable lever.

Pantograph
View Detail

Same as above but electrically operated to give a single constant rate of strain on 1.25 mm / min. Suitable for 230 V A.C. Weight 175 kg. approx

DSA(Motorised Six Speed)
View Detail

Same as above but having 6 rates of strain 1.25, 0.25, 0.05, 0.01, 0.002 & 0.0004 mm/min. Works on 230 v a. C. Nett wt. 185 kg.

DSA(Motorized 12 Speeds)
View Detail

Same as above but unit is electrically operated to give the following 12 rates or strains. 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002 mm/min.

Dynamic Cone Penetration
View Detail

Consists of one cone, plain 50 mm base diameter and cone angle 60, one cone adaptor, guide pipe assembly with one end cap and one driving head with threads for 'A' rod coupling.

EFH (Hand Operated)
View Detail

This extractor frame is used for taking out soil samples compacted or undisturbed, from 100 mm dia and 150 mm dia cylinders such as Core Cutters, Proctor moulds, c. B. R. Moulds etc.

Extractor Frame Universal
View Detail

Designed to extract specimens from almost every type of sampling tube and mould used in solid engineering laboratory or in the field. It has an unique feature that three 38 mm dia sample

Sand Pouring Cylinder
View Detail

The complete apparatus consists one each of: Small Sand Pouring cylinder, 3 litre capacity, fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 10 cm and internal depth 15 cm, fitted with a flange, Metal tray, 30 cm.

Grain Size Analysis
View Detail

The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it to be raised or lowered vertically.

High Speed Stirrer
View Detail

This is for mechanical analysis and also other laboratory applications for stirring. Speed approximately 4000rpm under load.

Infrared Moisture Balance
View Detail

It is a fast ,accurate method to derive direct moisture % in a sample by Loss on Heating Method. Heating arrangement consists of a 250 watt heating lamp with a solid state power stat to control rate of drying and also temperature.

2014 Copyright Roorkee scientific Emporium & All Rights Reserved